Welcome to our Frequently Asked Questions
section. We appreciate your interest and hope that you find what you need below. If you
have any further questions, please do not hesitate to ask!
contact information is located at the top of every page including email address,
Physical street address for mail contact and fax phone #. If
you would like to contact us via E-mail, just click the E-mail button at any time.
hand side = Driver Side,
hand side = Passenger Side
Brake Line Shipping Bends
bends are required to ship all lines over 6 feet in length. This bend is a
large-radius bend that is the same as a 5 gallon bucket. The tubing is not
stressed so the bend is easily straightened to the original form. To
remove the shipping bend, simply unroll the section marked between the
tags on a flat surface such as a table or garage floor. Use the floor as a
straight edge. Whatever gentle bend is left, straighten by hand. When the
tube is straight you are done.
Do I need a dual master and proportioning
valve if my car has been converted to disc brakes?
Disc and drum brakes require different pressures. Disc brakes require
about 1000 lbs. of pressure and drum brakes use about 300 lbs. This is
why the dual master requires a proportioning valve to control the
pressure in the system. Whether the car is disc front or all wheel disc,
a proportioning valve is required.
(New Old Stock) New GM original part
EDP= Electro-deposit primer,
which is a method of attaching primer to bare steel by electrically
charging it. This process has been tested in 500 hours of salt spray
with no corrosive effects. The only surface preparation required is
scuffing of surface for better paint adhesion before painting. These
parts are protected from rust as long as EDP coating remains under
All literature, including
books, manuals, diagrams, and printed materials are non-returnable due to the
nature of the material included. Truck Freight Items, Electrical parts,
Carpet, Upholstery, drop suspension parts, under-bed conversion tanks and all
special order items shipped direct from Manufacturer are non-returnable.